➤Effectively Breaks Down Wheel Grime.
Effortless scrubbing, ultra-fast cleaning.
➤High-Moisturizing Formula
Allows for relaxed and leisurely wheel cleaning experience.
➤Imported Ionic Formula
No pungent odor, enhances the pleasure of car washing.
➤High-Concentration Formula
A small amount of product is all you need for effective cleaning.
➤ Special Ionic Gloss Effect
Enhanced shine formula, leaves surfaces shiny like new.
How to Use
➤ Pre-Wash Usage
Spray directly onto wheels and rims, then cover with foam to extend the moisturizing time. Allow 1-3 minutes for the solution to react, then rinse thoroughly until no residue remains.
➤For regular washing or heavily soiled wheels, spray at a 45-degree angle, then scrub with a cleaning tool. Rinse thoroughly after scrubbing.
Suitable For
Suitable for OEM, forged, and flow-formed wheels. Avoid using on anodized and electroplated aluminum wheels.
AK’s Tips & Tricks
For heavily soiled wheels that haven't been cleaned in a long time, first spray with Tar & Glue Remover and Iron Remover. Then, follow with Wheel Cleanser. In most cases, a high-pressure rinse alone, without scrubbing, will remove approximately 80% of the dirt, saving significant time and effort.
During hot summer days, mix Dense Snow Prewash Master and Wheel Cleanser at a 1:5 ratio, then spray onto the wheels using a foam gun or foam sprayer for a gentle cleaning.
For the most soothing and moisturizing cleaning experience, mix 100ml of Foam Master - Car Wash and 200ml of Wheel Cleanser in a bucket with 2 liters of water. Then, use a brush or wheel mitt to apply and scrub the wheels.
This method is also highly suitable for cleaning heavily soiled wheel arches and lower guard board. After scrubbing, be sure to rinse thoroughly until completely clean.
Storage Instructions
- All car wash chemicals, maintenance agents, and waxes should be stored away from direct sunlight or high temperatures, in a cool, ventilated indoor area (no need to refrigerate).
- Properly stored car wash chemicals, maintenance agents, and waxes have no expiration date.
- Some biodegradable cleaners may develop a light layer of mold on the surface if stored for a long time. Simply remove the mold; this will not affect the product's performance or quality.
Precautions
- Shake well before use.
- Do not use in direct sunlight and do not allow the product to remain on the surface for extended periods or dry completely.
- Keep away from fire and children. Wear gloves and eye protection to avoid contact with wounds and eyes.
- If it comes into contact with eyes, rinse thoroughly with plenty of water and seek medical attention immediately.
- Avoid contact with clay bar products.
Spray Bottle Precautions
- When refilling any chemicals, do not overfill beyond the bottle neck to avoid spillage.
- Never store the bottle upside down to prevent liquid from continuously flowing into the sprayer and causing wear.
- If the spray bottle will not be used for an extended period, remove the sprayer and securely close the bottle with the cap.
- Do not intentionally shake, squeeze, invert, or knock over the bottle to prevent sprayer leakage (this is a normal phenomenon with all commercially available sprayers). To prevent chemical odors or liquid evaporation, remove the sprayer, dispense any remaining liquid from the sprayer, rinse with clean water, and then securely close the bottle.
Purchase Notes
- If you need a sprayer, please select the '+New Effortless High Flow Spray Nozzle' option in the product specifications.
- For Taiwan Customers, each convenience store pickup order is limited to one 2.3L bottle of chemical solution, and should not be combined with other products to avoid exceeding the 5kg weight limit for convenience store shipping.
- For overseas customers, please refer to the"Overseas Purchase Notice".
Further Reading
Recommended Pairings
- Foam Master - Car Wash
- Dense Snow Prewash Master
- High Density Wheel Rim Brush 35mm
- Long Steel Brush
- AK Multipurpose Tire Brush
